ReGen Power
30KVA to 300KVA
UL544 Listed



  • Superior Voltage Regulation
  • Overload & Overcurrent Protection
  • Low Impedance Transformer
  • High Reliability/Low Parts Count
  • Protects Against Spikes, Surges & Sags
  • Tolerates Loss of One Input Phase



    Zero Noise Output

    The double conversion process, AC-DC-AC, of the ReGen Power system has a regenerative effect on the power. The ReGen regulators system output power characteristics are isolated from the input power. This means neither common-mode or normal-mode noise is presented to the protected load. The regenerated output provides for the elimination of spikes, sags, and surges while at the same time producing clean sine wave output power to the using load.


    Electronic Regulation

    The ReGen system is a true electronic regulator designed specifically for protecting todays electronic equipment. The low impedance transformer and high capacity inverter maintains power to the crucial peak demands of a wide range of different types of electronic systems, like controllers for numeric milling machines, MRI and CAT scanners, rocket test motors and any other electronic device sensitive to changes in the electrical delivery line. The design allows for the acceptance of a wide range of voltage and frequency with the ability to program a variety of specified outputs with ease.


    Overload & High Current Capacity Abilities

    The system can provide an extremely high amount of surge current to demanding electronic equipment. The ReGen was designed with a unique high inrush inverter that will supply currents many times the nominal regulators ration. Therefore, the ReGen does not have to be oversized to meet the demands of the high inrush current of most abnormal load requirements. The overload rating is higher in both magnitude and duration than the typical tap switching or ferroresonant regulator. THis ensures that the electronic equipment is fully power isolated and protected during all phase of customers equipment operation. The overload capacity of the ReGen system is the only regulator capable of absorbing the inrush currents created by air conditioners and/or other motors loads.


    Ruggedized System

    The ReGen systems basic design, both electronically and mechanically, is designed for harsh environmental conditions. The electrical harness and board connections are mechanically locked to resist degradation due to vibrations. The NEMA 1 enclosure is a field proven product.


    Specifications
    Input
    Voltage: 208VAC to 480VAC Three-phase
    Frequency: 50, 60, and 400HZ
    Distortion: < 3
    Power Factor: 0.90L
       
    Output
    Voltage: 120VAC to 480VAC
    Power Rating: 130KVA through 300KVA
    Voltage Adjustment: Precision
    Harmonic Distortion: 3%THD at rated load
    Regulation: Input- +10% to -25% of Nominal
    Output: +/- 1.5%
    Frequency Stability: +/- 0.5%
    Common Mode Noise: Zero
    Normal Mode Noise: Zero
    Efficiency: 94% Nominal
    Overload Rating: 1000% for 1 cycle
    200% for 20 seconds
    150% for 1 minute
       
    Environment
    Audible Noise: 65 db max
    Cooling: Forced Air
    Temperature: 0F to 105F
    Relative Humidity: 0 to 95% non-condesing
    Enclosure: NEMA 1 (ventilated)
    Design Standards: UL544, ANSI, IEC, OSHA, NEC


    Standard Models
    Output KVA Dimensions Weight
    30 29H x 23W x 20D 745 lbs.
    50 29H x 23W x 25D 1095 lbs.
    75 29H x 23W x 25D 1402 lbs.
    100 72H x 23W x 32D 1720 lbs.
    125 72H x 23W x 32D 2000 lbs.
    150 72H x 46W x 32D 2295 lbs.
    175 72H x 46W x 32D 2495 lbs.
    200 72H x 46W x 32D 2975 lbs.
    For KVA above 200, contact us.

    For very competitive pricing, Call Us for a quote......

    Computer Power Solutions, Inc.